$69.95
G2 Throttle Tamer for Beta
Get Control! Smoother power delivery with the G2 Throttle Tamer Tube for Beta Enduro & Trials motorcycles. Progressive shaped throttle provides better control in technical situations. Faster cornering – more traction – better confidence in gnarly conditions!
G2 Throttle Tamer Tube for Beta
The G2 Throttle Tamer for Beta Enduro & Trials motorcycles is designed to help YOU become a better rider! How? It uses a “progressive” (non-circular) ratio between throttle grip rotation and power delivery. By changing the shape of the pulley, or “cam”, the Throttle Tamer gives you a huge improvement in control! This is the exact throttle used on Beta USA Brand Ambassador and 13 time AMA National Champ Rodney Smith!
Each Beta Throttle Tamer’s progressive shape is proven to be the best all-round solution for each model. For most models, the cam size begins about 20% smaller that stock, then it ramps up to the stock size by about one-half throttle.
The Throttle Tamer’s 20% smaller size requires slightly more rotation at first. This slightly longer pull makes a HUGE difference in control! As the power is rolled on, you will find it far easier to modulate traction. The cam size increases, or ramps up, after ½ throttle to keep overall rotation near stock rotation. Whether your goals are faster cornering, less wheelspin or more finesse on those goat trails, the G2 Throttle Tamer will improve your ability to control the throttle!
For 2 cable models (4 strokes or 2 stroke EFI), the cam appears circular from the side. However, if you look closely you will see a channel machined into the cam, This channel has our progressive “tamer” shape. Utilizing a channel provides all the control while keeping the cable positioned properly.
Are Delrin bushings better than ball bearings?
Ball bearing equipped throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar. With G2 Throttles, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance, or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!
Using handguards? No problem with the G2 Throttle Tamer Tube for Beta! The end cap is removeable and allows easy handguard installation. The knurled area allows for solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!
G2 Throttle Tamer Tube for Beta
- Machined from 6061 aluminum in the USA!
- Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
- Progressive ratio is our best recommended shape for each machine’s power characteristics.
- Fits inside the stock throttle housing to stock cables.
- Slide one of our Domino Grips (sold separately) or your grip unto the included throttle tamer tube.
- Removable end cap eliminates the need to cut the end of the throttle tube when using dirt bike handguards
- Installs in minutes!
Anonymous –
Quality parts. Noticeable effect. Not sure I’m keeping the quick CAM long term. I like that I can change the CAMS.
Chris Rees –
Barely noticeable difference on a 2 stroke. If your looking to tame your bike try a stronger power valve spring or a combination of both.
Ernest –
Best upgrade to my yz250x
Joey K. –
Love it
Jamie T. –
High quality product with great results.
Chuck Kornutiak –
I like the ability to adjust as needed with different cams.
Dan D. –
G2 trials throttle tube is exactly what I needed!
Hugo –
Wife love it on her bike
Ryan Brown –
Smooooooooth
Thomas Grimmel –
Great quality