(140 customer reviews)

$69.95

G2 Dirt Throttle Tamer For Gas Gas

Get Control! Smoother power delivery with the G2 Throttle Tamer Tube for GasGas motorcycles. Progressive shaped throttle provides better control in technical situations. Faster cornering – more traction – better confidence in gnarly conditions!


  • Add G2 Jimmy Twister?
    Ultra-smooth throttle action. See how it works
  • *Model

    Reset options
SKU: g2-d-tmr-gasgas Categories: , Tags: , ,

G2 Throttle Tamer Tube for GasGas

The G2 Throttle Tamer for GasGas motorcycles is designed to help YOU become a better rider! How? It uses a “progressive” (non-circular) ratio between throttle grip rotation and power delivery. By changing the shape of the pulley, or “cam”, the Throttle Tamer gives you a huge improvement in control! This is the exact throttle used on Beta USA Brand Ambassador and 13 time AMA National Champ Rodney Smith!

Each GasGas Throttle Tamer’s progressive shape is proven to be the best all-round solution for each model. For most models, the cam size begins about 20% smaller than stock, then it ramps up to the stock size by about one-half throttle.

The Throttle Tamer’s 20% smaller size requires slightly more rotation at first. This slightly longer pull makes a HUGE difference in control! As the power is rolled on, you will find it far easier to modulate traction. The cam size increases, or ramps up, after ½ throttle to keep overall rotation near stock rotation. Whether your goals are faster cornering, less wheelspin or more finesse on those goat trails, the G2 Throttle Tamer will improve your ability to control the throttle!

For 2 cable models (4 strokes or 2 stroke EFI), the cam appears circular from the side. However, if you look closely you will see a channel machined into the cam, This channel has our progressive “tamer” shape. Utilizing a channel provides all the control while keeping the cable positioned properly.

Are Delrin bushings better than ball bearings?

Ball bearing equipped throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar. With G2 Throttles, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance, or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!

Using handguards? No problem with the G2 Throttle Tamer Tube for GasGas! The end cap is removeable and allows easy handguard installation. The knurled area allows for solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!

G2 Throttle Tamer Tube for GasGas

  • Machined from 6061 aluminum in the USA!
  • Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
  • Progressive ratio is our best recommended shape for each machine’s power characteristics.
  • Fits inside the stock GasGas throttle housing to stock cables.
  • Slide one of our Domino Grips (sold separately) or your grip unto the included throttle tamer tube.
  • Removable end cap eliminates the need to cut the end of the throttle tube when using dirt bike handguards
  • Installs in minutes!
Weight .2 lbs
Make

140 reviews for G2 Dirt Throttle Tamer For Gas Gas

  1. Hugo (verified owner)

    Works like it should

  2. Stephen H.

    Throttle tamer works as advertised. A life saver. Literally!

  3. Hunter K.

    This throttle is awesome for the 50cc bikes and kids who have a hard time getting full twist pf the throttle. Helps get in the powerband quicker. Great buy, the Jimmy twister addition makes for a super smooth throttle action too.

  4. Randall Johnson

    It is so smooth and the removable end cap is great as i run full wrap bark busters.

  5. Chris Nicola

    The G2 throttle tammer was the missing link in my bike setup. Now it’s a lug monster.

  6. Rod

    The G2 throttle tamer is real help to achieve grip in slippy technical going, this has been my first mod on all my 2 strokes, now on a 2019 EC300 Ranger

  7. Paul

    The bike was a lot to handle before adding this mod. I feel comfortable with this and may change cams if and when I get better.

  8. Lorenz Winkel

    Very Good!

  9. Rob R.

    Still evaluating. Build quality is very nice. So far on technical terrain trail ride, did not notice any difference at first and bike was just a snappy as ever. Adjusted free play cable(s) balance to where I could start feeling it calm (“tame”) the throttle response. Few minutes later throttle starting hanging up and response fell way off. Carefully rode back to the truck. After removing Throttle Tamer, observed rubbing on the throttle body and some minor abrasion on the cable slot (almost as though cable came out of channel). Returned to stock tube for now and may retest at a later date. Photographs reflect tube abrasion and binding points.

  10. mike Osborne

    The single best upgrade you can do for a dirt bike.

Add a review

Your email address will not be published. Required fields are marked *

You might be interested in…

© 2024 G2 Ergonomics | All Rights Reserved
Our recommendations

You might need grips with your new G2 Throttle.

G2 Ergonomics Motorcycle Throttle Store Domino Road Racing Grips
You might need grips with your new G2 Throttle.

Need more options?

Build Your Own Throttle

Swap G2 Cams to fine tune your ride. All Cam Sizes Available. Quick / Tamer / Stock and more!