(161 customer reviews)

$69.95

G2 Dirt Throttle Tamer For Husqvarna

Get Control! Smoother power delivery for Husqvarna motorcycles. Progressive shaped throttle provides better control in technical situations. Faster cornering – more traction – better confidence in gnarly conditions! Used by Magna1 Motorsports Husqvarna’s Ashburn!


  • Add G2 Jimmy Twister?
    Ultra-smooth throttle action. See how it works
  • *Model

    Reset options
SKU: g2-d-tmr-husky Categories: , Tags: , ,

G2 Throttle Tamer Tube for Husqvarna

The G2 Throttle Tamer for Husqvarna motorcycles is designed to help YOU become a better rider! How? It uses a “progressive” (non-circular) ratio between throttle grip rotation and power delivery. By changing the shape of the pulley, or “cam”, the Throttle Tamer gives you a huge improvement in control! This is the exact throttle used by 2022 GNCC XC1 Champ Jordan Ashburn with Magna1 Motorsports Husqvarna and countless other off-road professionals!

Each Husqvarna Throttle Tamer’s progressive shape is proven to be the best all-round solution for each model. For most models, the cam size begins about 20% smaller than stock, then it ramps up to the stock size by about one-half throttle.

The Throttle Tamer’s 20% smaller size requires slightly more rotation at first. This slightly longer pull makes a HUGE difference in control! As the power is rolled on, you will find it far easier to modulate traction. The cam size increases, or ramps up, after ½ throttle to keep overall rotation near stock rotation. Whether your goals are faster cornering, less wheelspin or more finesse on those goat trails, the G2 Throttle Tamer will improve your ability to control the throttle!

For 2 cable models (4 strokes or 2 stroke EFI), the cam appears circular from the side. However, if you look closely you will see a channel machined into the cam, This channel has our progressive “tamer” shape. Utilizing a channel provides all the control while keeping the cable positioned properly.

Are Delrin bushings better than ball bearings?

Ball bearing equipped throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar. With G2 Throttles, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance, or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!

Using handguards? No problem with the G2 Throttle Tamer Tube for Husqvarna! The end cap is removeable and allows easy handguard installation. The knurled area allows for solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!

G2 Throttle Tamer Tube for Husqvarna

  • Machined from 6061 aluminum in the USA!
  • Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
  • Progressive ratio is our best recommended shape for each machine’s power characteristics.
  • Fits inside the stock Husqvarna throttle housing to stock cables.
  • Slide one of our Domino Grips (sold separately) or your grip unto the included throttle tamer tube.
  • Removable end cap eliminates the need to cut the end of the throttle tube when using dirt bike handguards
  • Installs in minutes!
Weight .2 lbs
Make

161 reviews for G2 Dirt Throttle Tamer For Husqvarna

  1. Camille

    Used on my KTM FREERIDE EXC. Works PERFECT. This is the best replacement for the crappy plastic throttle tube you can get. Thanks!

  2. Darryel H.

    Perfect fit, smooth, didn’t even need cable adjusted.

  3. Anonymous

    There is just no comparison to plastic throttle tubes. G2 are on all my dirt and dual sport bikes from 150-950cc. Even as some stock bikes now come with swappable cams, they do not perform on a plastic tube the way G2 does. Would not trade mine for anything!

  4. Johnny K.

    Great quality product that works as advertised. Very nice for fuel injected bikes and technical terrain.

  5. Philippe M.

    Very nice ! I love it. It is solid and looks good. I added spacer to get rid of the slack on my ktm freeride e-xc.

  6. John Gallagher

    Makes power much smother and easier to manage when trail get rough and technical. Less fatigue and more traction.

  7. Floyd

    Fit and finish is excellent, using the spacers for slack, is upgrading of oem design, this now completes a smooth precision assembly.

  8. Tasha

    works great

  9. Charlie H.

    Easy to install and helped the on/off feeling of the throttle.

  10. David S.

    Great product! The one cable throttle conversion took out all the slack that I couldn’t get out of the stock throttle of my TE300i. Very smooth and precise now. Would definitely purchase again and highly recommend it.

Add a review

Your email address will not be published. Required fields are marked *

You might be interested in…

© 2024 G2 Ergonomics | All Rights Reserved
Our recommendations

You might need grips with your new G2 Throttle.

G2 Ergonomics Motorcycle Throttle Store Domino Road Racing Grips
You might need grips with your new G2 Throttle.

Need more options?

Build Your Own Throttle

Swap G2 Cams to fine tune your ride. All Cam Sizes Available. Quick / Tamer / Stock and more!