Product Description

The G2 Street Throttle Tamer Tube for Honda incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The throttle tube has a pulley where the throttle cable, or cables, attach. This pulley pulls the throttle cable as the rider rotates the grip/tube combination. By altering the conventional, circular shaped pulley into a “cam” shape, a vast improvement in control is achieved and throttle snatch is drastically reduced.

The G2 Street Throttle Tamer Tube has a pulley with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as compared to the stock throttle tube. This virtually eliminates the jerky “throttle snatch” especially evident in modern fuel injected street bikes. The radius increases or ramps up after ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation.

The profile shape and ratio proven to be the best all-round solution for each model is used.

You will need a grip to install to your new Throttle Tamer. If your stock grip is in good condition, most may be removed and installed onto your Throttle Tamer. Check out our INSTALLATION section for removing stock grips from the stock plastic throttle tube, gluing grips onto the Throttle Tamer and installing the Throttle Tamer with your stock throttle housing and cables.

G2 has offered the Street Throttle Tamer Tube for over 17 years with tens of thousands of satisfied customers worldwide. We guarantee you will find this the best investment in control you have ever made, or you can return the throttle for a full refund! At G2, we stand behind our products and pride ourselves on the best customer service. If you have ANY questions about our throttle, please call or email (see contacts page). We guarantee a human will answer the phone or respond to your voicemail within one business day!

Product Highlights

  • Machined from 6061 aluminum.
  • Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
  • Fits inside the stock throttle housing to stock cables.
  • Fits inside the stock throttle housing to stock cables.
  • Works with all known aftermarket cruise controls.
  • Slide one of our Italian-made Domino grips or your grip onto the G2 Street Throttle Tamer Tube.
  • Installs in minutes! Check out our INSTALLATION page for helpful tips.

20 reviews for G2 Street Tamer Throttle Tube – Honda

4.9
Based on 20 reviews
5 star
85%
4 star
15%
3 star
0%
2 star
0%
1 star
0%
Showing 3 of 20 reviews (4 star). See all 20 reviews
  1. beeker

    I found my recently purchased 2004 Honda st1300 a lot to handle. Pretty heavy bike and with a touchy throttle (both accelerating and decelerating) it was ‘an adventure’ especially in low speed turn situations. My riding partner also was challenged by the ‘full on/full off’ characteristics when accelerating and decelerating being alternately flung backwards and cracking forwards. The g2 has made a big difference. I am also consistently improving my riding skills. I am convinced that a large part of the improvement in performance is the adjustment to throttle cable tension that I made during the installation procedure. The reduction in tension on throttle cables has resulted in much smoother up and down shifts at speed and smoother ‘starts from stop’ and low speed power application to control the bike in cornering. The well made g2 tube is better quality and design than the stock Honda plastic tube. Since there is no substitute for the experience I am disappointed that the optional cams are so expensive to try. It would be nice if there was a choice when ordering. As a senior getting back into riding after a decade without a bike I am sure that my cam choice would be much more conservative than a younger more aggressive rider. The two changes and some experience have turned my st1300 into a more comfortable ride. Very pleased that G2 is meeting a need that is mysteriously overlooked by the engineers. … now if G2 could do something about the stock seat!

    Was this review helpful to you?
    Yes
    No
  2. Michael Bennett

    Stock tamer (stock cam) for 2016 Honda VFR1200X, works great. Could be a little more tamed, but good enough.

    2 out of 2 people found this helpful. Was this review helpful to you?
    Yes
    No
  3. Gary D.

    Verified reviewVerified review - view originalExternal link

    Fitted well

    Was this review helpful to you?
    Yes
    No
Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Cart

Your cart is currently empty.