The G2 Threaded Handguard Mounts provide a strong outer handguard mount that stays put! Conventional handguard outer mounts (securing handguard to handlebar end) have never done the job. The old school bolt-nut-rubber hose solution simply does not provide the strength necessary. One slow speed tip-over and your guards can move substantially. The more current aluminum split-wedge design is very strong, but vibration will loosen them very quickly. The bolt need only loosen about 1/8 turn and the wedges lose all strength and the handgaurd “pops out”.
The Threaded Bar Handguard Mounts are a twist on an old Enduro rider solution from the early 80’s. By tapping the inside of the handlebar, a threaded piece can be inserted to securely bolt the handguard to the handlebar end. All solutions involved steel which can corrode to the bolt and cause long term problems. The G2 Threaded Handguard Mount has proven to exceed all strength demands, and now available in nylon, aluminum, stainless steel, and zin-plated steel.
Replacement plastic handshields
Interchangeable G2 Cams for Kawasaki
Developed specifically for James Stewart and offers the smoothest throttle action possible. Fits all G2 Throttles.
Interchangeable G2 Cams for KTM. For newer models with silver housing, all cams are black or white machined Delrin. 200/300/400 “control” cams are circular from the side, but each has a unique channel that gives the same progressive shape ratio as our other aluminum cams.
Interchangeable G2 Cams for Yamaha