$119.95
G2 Slicer Pre-Tapped Handlebar
Handlebar with ultimate handguard or grip protector mounting solution. No more handlebar tapping to use threaded mounts! Video: G2 Slicer Overview
G2 Slicer Pre-Tapped Handlebar
The G2 Slicer Pre-Tapped Handlebar works equally well for moto or off-road. The Slicer handlebar is made of double-butted, tapered 7050-T76511 aluminum alloy. This alloy is the industry standard for handlebar strength and flex.
The top selling handlebar brands try to hide their material using goofy names ending with “-ilium”, or vague terms like “7000 series”. Not G2. We’re proud to announce the Slicer is made with the same 7050-T76511 aluminum that the world’s best handlebars companies use. Each production run is tested true by St. Louis Testing Laboratories – the most trusted material testing company in the USA!
The Slicer is the world’s first “pre-tapped” dirt bike handlebar! You heard right! The inside of each end is tapped with 5/8”x11 threads. Just insert a pair of G2 Threaded Mounts (included FREE) for the strongest, most secure handguard or grip protector mounting solution on the planet!
Pair it with G2 Full Wrap Handguards or G2 Grip Protectors for the ultimate setup.
What? You don’t use full wrap handguards or grip protectors? No worries! Just ignore the threads and use like any other handlebar!
The “Slicer” comes in four colors with three popular bends (dimensions shown in Product Dimensions tab above). All bends are “tapered” design that require 1 1/8” (28.6mm) handlebar clamps.
Product Highlights
- 7050-T76511 aluminum alloy – the exact alloy used by the top brands – no matter what name they make up!
- Shot-peened Type II Hard Anodized finish for durability and added strength
- Tested and verified by St. Louis Testing Laboratories, the most respected testing lab in the USA!
- Lightly knurled right side grip area works equally well with lock-on or glue-on grips!
- Laser etched center “tick marks” for precise positioning in the clamps.
- Tapered handlebar changes diameter from 1 1/8” (28.6mm) at clamping area to 7/8” (22.2mm) in controls area.
- Handlebar ends are tapped to work with G2 Threaded Mounts – the strongest full wrap handguard or grip protector solution possible!
- High impact molded foam pad with 4 color cover for increased protection!
Standard |
Width(A) |
Height(B) |
Rise (C) |
Clamp Area(D) |
Sweep (E) |
Control Area (F) |
Clamp Diameter |
Low |
32.00 |
3.07 |
1.65 |
5.91 |
2.13 |
7.87 |
1.13 |
Medium |
31.93 |
3.62 |
2.05 |
5.35 |
2.05 |
8.74 |
1.13 |
High |
31.65 |
4.09 |
2.52 |
5.91 |
2.13 |
7.40 |
1.13 |
Metric |
Width(A) |
Height(B) |
Rise (C) |
Clamp Area(D) |
Sweep (E) |
Control Area (F) |
Clamp Diameter |
Low |
813.00 |
78.00 |
42.00 |
150.00 |
54.00 |
200.00 |
Ø28.6mm |
Medium |
811.00 |
92.00 |
52.00 |
136.00 |
52.00 |
222.00 |
Ø28.6mm |
High |
804.00 |
104.00 |
64.00 |
150.00 |
54.00 |
188.00 |
Ø28.6mm |
Reviews
There are no reviews yet.