(137 customer reviews)


G2 Grip Protector Kit with Wedge Mount

Stop replacing your grips after every fall! The G2 Grip Protector withstands the crash, protects the grip and can even prevent your throttle from sticking open during right side spills! Includes pair of mounts and aluminum grip protectors in the color you choose!

SKU: g2-standard-grip-protect Categories: , Tag:

G2 Grip Protector with Wedge Mount

The G2 Motorcycle Grip Protector Kit with Wedge Mount protects grip ends with the easiest to mount grip protection kit available. The grip protectors are the best way to keep your grips looking and working great fall after a fall! That’s right. One tip over at slow speed (even off your bike stand!), and you can easily rip the end off your grips. This is easily solved with our grip protectors. An additional benefit is on the throttle side. When your right side handlebar end is touching the ground, the throttle can be held wide open. The grip protector allows the throttle to snap shut and deceases the chance of injury or engine failure due to a stuck throttle. Sounds familiar, doesn’t it Trials guys??

Grip protection option from trail to moto!

For off-road guys, the G2 Grip Protector Kit is a quick way to maintain grip protection during cross over to moto, since many tracks will not allow aluminum handguards. Once handguards are removed, your “hideous” grips with removed ends are revealed. No problem! Just bolt on these grip protectors for a sano moto cross-over!

Strong Grip Protector mount system

The G2 Grip Protector Kit with Wedge Mount has a strong mount that is easy to install. For the strongest grip protector available, check out the G2 Grip Protector Kit that come with G2 Threaded Mounts.

** IMPORTANT INFO for Stock Yamaha YZ/WR Handlebars **

Some stock Yamaha handlebars have a larger I.D. (size of hole in handlebar end). For these, we will send a larger threaded mount for proper fit. If you will be mounting this guard to STOCK HANDLEBARS on one of the models listed below, please choose option “Renthal Twinwall & Current Yamaha*” If you have any questions or concerns you cam always reach a human at 815-778-0468.

This pertains ONLY to STOCK handlebars for:

  • YZ250F (’19 & newer)
  • YZ450F (’18 & newer)
  • YZ250FX (’20 & newer)
  • YZ450FX (’20 & newer)
  • WR250F (’20 & newer)
  • WR450F (’20 & newer)
  • YZ125 (’21 & newer)
  • YZ125X (’21 & newer)
  • YZ250 (’21 & newer)
  • YZ250X (’21 & newer)


Grip Protection Features

  • Machined 6061 aluminum.
  • Strong wedge mounts included for standard aluminum, Renthal Twinwall and Steel handlebars.
  • Available in several colors.
  • Installs in seconds.
Weight .2 lbs

Titanium, Black, Blue, Orange, Red, Silver

137 reviews for G2 Grip Protector Kit with Wedge Mount

  1. Pete Anagnos (verified owner)

    Good communication and customer service

  2. Brian Bell (verified owner)

    Great Product and fast shipping

  3. Kasey H. (verified owner)

    Got delivered so quick from over seas, way faster than most places that are local

  4. David (verified owner)

    Seemed Legit

  5. Eric T.

    Keep your gaurds from moving in a crash work perfect!

  6. Jeremy

    I prefer threaded inserts to any other option for handguard installs. Needed a 9/16 tap for Yamaha handle bars. No clue where they source their taps, but it was more than adequate for tapping bar ends. I haven’t used the end caps, but I like having them in case I ever remove my handguards.

  7. Seth H.

    IN regards to the tap its high quality however I do wish that it came with a longer taper at the nose to bite a little better on some of the newer models or handguards that seem to have Narrower ends. Or perhaps include and drill bit to prep the ends to the correct diameter to run the tap.

  8. Anonymous

    Fit perfect!!

  9. Jimmy Ivy

    Great product!

  10. Jeff Willingham


Add a review

Your email address will not be published. Required fields are marked *

© 2024 G2 Ergonomics | All Rights Reserved