$69.95
G2 Dirt Throttle Tamer for Honda
Get Control! Smoother power delivery with the G2 Throttle Tamer Tube for Honda CR and XR models. Progressive shaped throttle provides better control in technical situations. Faster cornering – more traction – better confidence in gnarly conditions!
G2 Throttle Tamer Tube for Honda
The G2 Throttle Tamer for Honda Enduro & Trials motorcycles is designed to help YOU become a better rider! How? It uses a “progressive” (non-circular) ratio between throttle grip rotation and power delivery. By changing the shape of the pulley, or “cam”, the Throttle Tamer gives you a huge improvement in control! This is the exact throttle used by Phoenix Honda’s GNCC Team when things get nasty!
Each Honda Throttle Tamer’s progressive shape is proven to be the best all-round solution for each model. For most models, the cam size begins about 20% smaller than stock, then it ramps up to the stock size by about one-half throttle.
The Throttle Tamer’s 20% smaller size requires slightly more rotation at first. This slightly longer pull makes a HUGE difference in control! As the power is rolled on, you will find it far easier to modulate traction. The cam size increases, or ramps up, after ½ throttle to keep overall rotation near stock rotation. Whether your goals are faster cornering, less wheelspin or more finesse on those goat trails, the G2 Throttle Tamer for Honda will improve your ability to control the throttle!
For 2 cable models (4 strokes or 2 stroke EFI), the cam appears circular from the side. However, if you look closely you will see a channel machined into the cam. This channel has our progressive “tamer” shape. Utilizing a channel provides all the control while keeping the cable positioned properly.
Are Delrin bushings better than ball bearings?
Ball bearing equipped throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar. With G2 Throttles, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance, or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!
Using handguards? No problem with the G2 Throttle Tamer Tube for Honda! The end cap is removeable and allows easy handguard installation. The knurled area allows for solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!
G2 Throttle Tamer Tube for Honda
- Machined from 6061 aluminum in the USA!
- Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
- Progressive ratio is our best recommended shape for each machine’s power characteristics.
- Fits inside the stock throttle housing to stock cables.
- Slide one of our Domino Grips (sold separately) or your grip unto the included throttle tamer tube.
- Removable end cap eliminates the need to cut the end of the throttle tube when using dirt bike handguards
- Installs in minutes!
| Weight | .2 lbs |
|---|---|
| Make |
Aaron D. (verified owner) –
First impression, very well crafted, smooth edges and nicely anodized. Assembly was easy took me about 15 minutes to install.
How it worked, before when riding at a steady pace on rough terrain the stock throttle reacted to every little bump. It was difficult to be smooth on/off gas at times. The G2 Tamer is like magic. Even in the roughest terrain I can keep the throttle right in the sweet spot. I would highly recommend this throttle tube to anyone with a fuel injection bike. You won’t regret it…..
Ryan –
Made a world of different on my 22 crf 450x. makes the bike feel way more manageable. 10/10
Anthony Lopez (verified owner) –
Bike: ‘21 CRF450RX
Night and day difference, for technical trails and single track. Bottom end of power is more usable without stalling.
Matt Colley (verified owner) –
Perfect quick delivery easy to install works well . Thanks .
Major (verified owner) –
I installed this on my 22 crf450rx . It made a pretty big difference in the response . I am a novice rider and the bike is a torque monster . With the throttle tamer in combination with a rekluse clutch the bike is a totally different animal and enjoyable to ride . Now I can concentrate on riding instead of hanging on for my life .
James Piccone (verified owner) –
High quality aluminum throttle tube with delrin bushings & legit grip donuts. Improved the on/off light switch feeling of throttle for slower technical riding. I highly advise for any fuel injected motorcycles “throttle tamer” for improved throttle response and smoothness.
Steve Ghormley –
The addition of the G2 totally change the low speed handling of my CRF 450 RL. I highly recommend this product, even before you decide to change the ECM, it really helps,
Paul Van Hout (verified owner) –
As with previous installations of the G2 throttle tamer it definitely smooths out off-idle to low speed throttle response and tames the CRF450RL aggressiveness without compromising overall performance. The installation instructions are exceptional and overall product quality is top notch.
Stephen McKenzie (verified owner) –
CRF300L. Works well. Subtle difference.
If you just jumped on the bike and took off, you wouldn’t notice anything unusual. But knowing it’s on there, when it reaches the lobe on the cam, about half cranked, you can really feel the increase.
I like it.