$69.95
G2 Dirt Throttle Tamer For Husqvarna
Get Control! Smoother power delivery for Husqvarna motorcycles. Progressive shaped throttle provides better control in technical situations. Faster cornering – more traction – better confidence in gnarly conditions! Used by Magna1 Motorsports Husqvarna’s Ashburn!
G2 Throttle Tamer Tube for Husqvarna
The G2 Throttle Tamer for Husqvarna motorcycles is designed to help YOU become a better rider! How? It uses a “progressive” (non-circular) ratio between throttle grip rotation and power delivery. By changing the shape of the pulley, or “cam”, the Throttle Tamer gives you a huge improvement in control! This is the exact throttle used by 2022 GNCC XC1 Champ Jordan Ashburn with Magna1 Motorsports Husqvarna and countless other off-road professionals!
Each Husqvarna Throttle Tamer’s progressive shape is proven to be the best all-round solution for each model. For most models, the cam size begins about 20% smaller than stock, then it ramps up to the stock size by about one-half throttle.
The Throttle Tamer’s 20% smaller size requires slightly more rotation at first. This slightly longer pull makes a HUGE difference in control! As the power is rolled on, you will find it far easier to modulate traction. The cam size increases, or ramps up, after ½ throttle to keep overall rotation near stock rotation. Whether your goals are faster cornering, less wheelspin or more finesse on those goat trails, the G2 Throttle Tamer will improve your ability to control the throttle!
For 2 cable models (4 strokes or 2 stroke EFI), the cam appears circular from the side. However, if you look closely you will see a channel machined into the cam, This channel has our progressive “tamer” shape. Utilizing a channel provides all the control while keeping the cable positioned properly.
Are Delrin bushings better than ball bearings?
Ball bearing equipped throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar. With G2 Throttles, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance, or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!
Using handguards? No problem with the G2 Throttle Tamer Tube for Husqvarna! The end cap is removeable and allows easy handguard installation. The knurled area allows for solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!
G2 Throttle Tamer Tube for Husqvarna
- Machined from 6061 aluminum in the USA!
- Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
- Progressive ratio is our best recommended shape for each machine’s power characteristics.
- Fits inside the stock Husqvarna throttle housing to stock cables.
- Slide one of our Domino Grips (sold separately) or your grip unto the included throttle tamer tube.
- Removable end cap eliminates the need to cut the end of the throttle tube when using dirt bike handguards
- Installs in minutes!
| Weight | .2 lbs |
|---|---|
| Make |
Ian K. –
New rider, tamed this FX350 beast nicely for me to find my feet and build some skills.. made a noticeable difference and cannot wait to get out and ride again. Technical woods riding mostly..
Stanford F S. –
Purchased this for my 701 Svartpilen and the benefit was immediately noticeable. Installation was super easy.
Joshua –
Super easy to install. Really helps with that punch and smooths the power band while still allowing me to ring it out of I need to. Has really helped in slow technical stuff and let’s me control traction a lot better. It’s also survived a few crashes without any handguards. Quality product.
Anonymous –
I really wanted to give a 5 star review but thought it important for others to know the truth. I will say that it may have been my throttle parts as much as the G2 parts but all were like new. The assembly would have taken 10 minutes but instead took much longer as the one lead cable end fit too tight in the throttle tamer hole so I needed to force it in and then back out and eventually reamed the hole to fit properly. Then I had to file the inside castings of the covers so they would not rub the slightly thicker than stock cam. And lube and fit just right to get the throttle to snap properly. I was not too happy since this is a very expensive part. If you are not handy do not buy this for your TE310R. I was also sad to see that the cam was not removable so I can not just order a different cam later if I choose. Note to others that the kit with 3 interchangeable cams is the better way to go and only 30 dollars more. Now the good part. My TE310R was very touchy and hard to control on sl
Cale Foster –
The best throttle money can buy.
Ernest –
Jan G. –
Must have! Improved my riding! Bike is much more tamed and controllable! Will definitely buy again for the next bike!
Anonymous –
This is my forth G2 Quick turn Throttle tube and I have been very pleased with the quality and function of the aluminum tube.
vincent f. –
Been using G2 Ergonomics products for years and and they nailed it with this new single cable throttle setup ! Great job from G2 thank you guys highly recommend!
Mark M. –
Awesome sauce